|
Genoa cars & sliders for 32mm 'T' track
Here is our extremely poular and comprehensive range of genoa cars and specialist sliders designed to run on 32 mm (1,1/4") "T" track, all manufactured from high quality marine grade aluminium.
Finished in our all new 'Spectro' grey anodised finish to give added protection and an extremely high quality finish.
All cars and sliders on this page feature moulded plastic inserts which ensure free running under load whilst preventing damage and possible corrosion to track or slider.
Genoa cars are available in two sizes with a heavy duty version for larger boats or where a high load capacity is required.
"T" TRACK:
For use with all sliders featured on this page. Drilled for fastenings and plunger stops, finished in our new 'Spectro' grey finish. Supplied in metric lengths.
|
 |
ALL CARS AND SLIDERS FEATURE:
- 'Spectro' grey anodised finish
- Moulded slide inserts to ensure free running
- Stainless plunger stops with positive action
- Large easy grip plunger knobs
GENOA CARS WITH PLUNGER STOP:
Have precision turned Ertyalyte sheaves running on large diameter centre boss to give friction free performance under high load. Designed with a generous width which will accept two sheets. Sheave axle is through bolted to give added strength and security.
TOWABLE GENOA CARS:
Have all the features of the above but the plunger is deleted in favour of a tow eye or sheave. This allows a control line to be fitted and led aft enabling genoa car adjustments to be made from the safety of the cockpit
STAND UP BLOCK:
Has a stainless steel eye fitted to a stainless loop through bolted and rivetted for added strength and security. The moulded plastic spring / gaiter enhances the appearance whilst eliminating rope snags. Ball bearing blocks from our popular cruiser range are utilised and three sizes are available for lines up to 14mm.
GENOA AND MAINSHEET SLIDES:
Have a heavy stainless attachment loop through bolted and rivetted for added strength and security. This strong unit will accept most blocks featured on earlier pages.
SPINNAKER POLE SLIDE:
With heavy duty stainless ring welded to attachment plate. This assembly is through bolted to slide. The generous ring opening will accept most pole ends.
TOWABLE SPINNAKER POLE SLIDE:
Features eyes at each end for attachment of lines for a control line system and plastic slide inserts for free running. Use with 659 (32mm) track end fittings.
FOOT BLOCKS:
Designed for use with genoa cars featured on this page. These strong and rugged blocks have a three bolt fixing allowing ease of fitting and high loading capability. Finished in our new 'Spectro' grey anodised finish. Precision turned Ertalyte sheaves run on a large diameter centre boss giving a friction free performance under high loads with minimal maintenance. |
|
| 32mm 'T' TRACK SPECIFICATIONS |
|
Track Dimensions :
- Height: "H" 14mm
- Height: "J" 5mm
- Width: "W" 32mm
- Width: "X" 18mm
|
- Fastening Dia: 6mm
- Fastening Centres: 100mm
- Plunger Centres: 50mm
- Weight: 756gms per meter
|
|
| 'T' TRACK 32MM |
| New No. |
Length |
| 32000 |
Per meter |
 |
| 32010 |
0.6 meter |
|
| 32020 |
1.2 meter |
|
| 32030 |
1.8 meter |
|
| 32040 |
2.4 meter |
|
| 32050 |
3 meter |
|
| 32060 |
5 meter |
|
| 32901 |
Track end stops/pair |
|
| |
|
|
