Chandlery Home

Genoa cars & sliders for 25mm 'T' track

Here is our extremely poular and comprehensive range of genoa cars and specialist sliders designed to run on 25 mm (1") "T" track, all manufactured from high quality marine grade aluminium.
Finished in our all new 'Spectro' grey anodised finish to give added corrosion protection and an extremely high quality finish.
All cars and sliders on this page feature moulded plastic inserts which ensure free running under load whilst preventing damage and possible corrosion to track or slider.

"T" TRACK:
For use with all sliders featured on this page. Drilled for fastenings and plunger stops, finished in our new 'Spectro' grey anodising. Supplied in metric lengths.

ALL CARS AND SLIDERS FEATURE:

'Spectro' grey anodised finish
Moulded slide inserts to ensure free running
Stainless plunger stops with positive action
Large easy grip plunger knobs

GENOA CARS WITH PLUNGER STOP:
Have precision turned Ertyalyte sheaves running on large diameter centre boss to give friction free performance under high load. Designed with a generous width which will accept two sheets. Sheave axle is through bolted to give added strength and security.

TOWABLE GENOA CARS:
Have all the features of the above but the plunger is deleted in favour of a tow eye or sheave. This allows a control line to be fitted and led aft enabling genoa car adjustments to be made from the safety of the cockpit

STAND UP BLOCK:
Has a stainless steel eye fitted to a stainless loop through bolted and rivetted for added strength and security. The moulded plastic spring / gaiter enhances the appearance whilst avoiding rope snags. Two block sizes are available for 10mm and 12mm lines.

GENOA AND MAINSHEET SLIDES:
Have a heavy stainless attachment loop through bolted and rivetted for added strength and security. This strong unit will accept most blocks featured on earlier pages.

SPINNAKER POLE SLIDE:
With heavy duty stainless ring welded to attachment plate. This assembly is through bolted to slide. The generous ring opening will accept most pole ends.

TOWABLE SPINNAKER POLE SLIDE:
Features eyes at each end for attachment of lines for a control line system and plastic slide inserts for free running. Use with 657 (25mm) track end fittings.

BULLSEYE SLIDE:
With a through bolted bullseye fairlead which swivels to accept correct sheet lead. Has a stainless eye insert to prevent wear.

25mm 'T' TRACK SPECIFICATIONS

Track Dimensions :

Height: "H" 10mm
Height: "J" 4mm
Width: "W" 25mm
Width: "X" 14mm

Fastening Dia: 5mm
Fastening Centres: 100mm
Plunger Centres: 50mm
Weight: 441gms

'T' TRACK 25MM
New No.	Length
25000	Per meter

25010	0.6 meter

25020	1.2 meter

25030	1.8 meter

25040	2.4 meter

25050	3 meter

25060	5 meter

25901	Track end stops/pair

FOOT BLOCKS -

		Here is our totally new designed range of Foot Blocks manufactured from high-grade marine quality aluminium "Spectro" grey anodised for goods looks and durability. All feature hollow stainless steel rivets, which allow for through bolt fastenings giving extra strength. Sheaves are turned from solid Ertalyte bar and run on a large diameter centre bearing for easy running under high load.

This design also allows for blocks to be stacked, to achieve doubles. Available in three sizes as follows:

Part	Sheave Dia mm	Sheave Width mm	Max rope dia mm	SWL - Kg	Fixings	Length - mm
82995	50	15	10	500	3 x M6	79
82996	65	18	12	800	2 x M6 1 x M8	100
82997	85	21	14	1500	2 x M8 1 x M10	132

IMPORTANT NOTES:
Fastenings of the minimum diameter suggested should be used to gain full load Capability. Ensure that suitable mounting pads are provided under deck. Stacking Blocks to achieve doubles will reduce working loads.

FOOT BLOCKS WITH CAM -

Available in two sizes, with material specifications as our new foot block range. Details and holding power are as follows:

Part	Sheave Dia mm	Sheave Width mm	Max rope diameter	SWL - Kg	Max holding Power of cams kg	Fixings	Length - mm	Width - mm
82998	50	15	10	500	250	3 X M6	79	50
82999	65	18	12	800	300	2 x M6 1 x M8	100	65

GENOA CARS
New No	Type	L mm	W mm	H mm	Sheave Dia mm	Max line Diamm	Break Load kg	SWL kg	Wgt gms
25100	Genoa Car	80	42	87	40	2x12	2280	1140	247

TOWABLE GENOA CARS
New No	Type	L mm	W mm	H mm	Sheave Dia mm	Max line Diamm	Break Load kg	SWL kg	Wgt gms
25200	Towable Genoa Car	80	42	87	40	2x12	2280	1140	258

25220	Towable Genoa Car	175	45	105	38	2x12	1181	650	297

TOWABLE CAR END FITTINGS
New No	Type	L mm	W mm	H mm	Sheave Dia mm	Max line Diamm	Break Load kg	SWL kg	Wgt gms
25210	Track end	88	37	35	35	8	-	-	105

25221	Track end, becket	88	37	35	35	8	-	-	108

GENOA SLIDES
New No	Type	L mm	W mm	H mm	Sheave Dia mm	Max line Diamm	Break Load kg	SWL kg	Wgt gms
25301	Genoa slide	80	42	45	-	-	2860	1430	123

MAINSHEET SLIDES & STOPS
New No	Type	L mm	W mm	H mm	Sheave Dia mm	Max line Diamm	Break Load kg	SWL kg	Wgt gms
25300	Mainsheet slide	80	42	40	-	-	2860	1430	111

25900	Slide stop	25	32	34	-	-	-	-	62

STAND UP BLOCKS
New No	Type	L mm	W mm	H mm	Sheave Dia mm	Max line Diamm	Break Load kg	SWL kg	Wgt gms
25310	Stand up block 3	80	42	120	45	10	980	490	223

25311	Stand up block 4	80	42	137	57	12	1580	790	305

SPINNAKER POLE SLIDE
New No	Type	L mm	W mm	H mm	Eye Inside Diameter mm	Wgt gms
25302	Plunger pole slide	80	42	60	28	178

25304	Towable pole slide	80	42	60	28	178

BULLSEYE SLIDE
New No	Type	L mm	W mm	H mm	Eye Inside Diameter mm	Wgt gms
25303	Bullseye slide	80	42	60	18	165